- Boosts Power
- Increases Horsepower
- Increases Compression
- Alleviates Wear at Startup
Amalgamated® Engine Wear Protector dramatically reduces heat and wear on all metal surfaces. It is compatible with all synthetic and mineral based stock oils. This multi purpose additive is intended for both gasoline and diesel powered engines.
Amalgamated® Engine Wear Protector is not just another lubricity additive, but is actually a unique 'state-of-the-art' quality Lubricity Additive. It is specifically designed with unique and proprietary lubrication components which will substantially enhance engine performance and improve the fuel economy in all types of engine powered equipment.
In itself, Amalgamated® Engine Wear Protector does not void any engine warranty. It has been tested rigorously using ASTM procedures by independent laboratories and is approved by the EPA.
For Engines (all types):
Wear Protector Engine Oil
1 quart to 40 quarts
28 ounces to 35 quarts
24 ounces to 30 quarts
20 ounces to 25 quarts
16 ounces to 20 quarts
12 ounces to 15 quarts
8 ounces to 10 quarts
4 ounces to 5 quarts
.8 ounces to 1 quart *
* for convenience, simply add 1.5 ounces per each quart of oil every 5th oil change
For Transmissions (manual or automatic):
Add 4 ounces at every 30K miles of service
Add 2 ounces to the gear box every 30K miles of service
Re-apply at every oil change
For Transfer Case:
Use 2 to 4 oz. per vehicle
3/4 of an ounce per quart of hydaulic oil
2 oz. per gallon of fuel AFTER being pre-mixed with two stroke oil
if oil injected, use 4 oz. in oil side
add 32 oz. per 55 gallon drum grease keg OR 1 oz. per tube of grease
(mix well with a broom handle or long screwdriver)
For Roller & Ball Bearings:
Dip clean bearings into the additive during pre-assembly.
Mix additive into grease and pack bearing.
Add every 2700 hours of operation or once each year (365 days)
Add every 5 years or 50,000 miles.
WHOLESALE (RESELLER) PRICING also available. Contact us for details.